Walksnail X型护目镜单独LED盖子（适用于Skyzone Steadyview X）

Walksnail Goggles X Single LED Cover for Skyzone Steadyview X

2024-01-07 12:05:08

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Walksnail X型护目镜单独LED盖子（适用于Skyzone Steadyview X）

Summary

This is an remix of the excellent Skyzone Steadyview X receiver mount for the Walksnail Goggles X by Archeantus.

I wanted to keep the stock LED for the left side so cut the mount to only use the right cover. That also let me slice it in half so it can be printed without supports.

Just glue the two halfs together with cyanoacrylate adhesive. The one labelled front-top holds the Steadyview receiver and is attached to the stock receiver case cover. The one labelled back-bottom fits into the tabs on the bottom of the right goggle faceplate and snaps into the top.

Print with PETG or maybe PC. PLA or even PLA+ is too soft for the little tabs supporting the Steadyview case on to hold the tiny screws that fix the receiver circuit board to the case.