奇异比奇怪大作战 - 多部件 - 凹面 - 风扇格栅 + 更多（混音版）
Kirby Fume Extractor - Multiparts - indents - fan grill + more (remix)
2024-01-07 16:23:35
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
Kirby comes in many colours. Pink. Blue. Green. White. Purple....Yellow
Sylvian 42 + jocoquemx have done most of the hard work for us already here, so go give them some support!
Remixed to add some extra features and some attitude.
it's still using the 80mm fan.
New Features:
- indented areas for placement of cheeks, eyes, etc.
- back fan grill with minimal air resistance. (may require some editing)
- hole for fan wire (hopefully will fit a USB type a)
- flat area to glue an on/off switch too.
- internal cable routing options. These line up with the arms, so a hole can be drilled to mount an on/off switch on top, or even a rotary knob to control the fan speed.
- Optional tongue
Planned/ Ideas:
- 120mm fan version (suggestions are size to 149%, testing this currently)
- Cap for Kirby?
- different expressions
- wireless / batteries in feet conducted through magnets.
- Match fan grill to be same sized square as front half.
- different back attachments
Tags
License
CC BY-NC-SA
Kirby Fume Extractor - Multiparts - indents - fan grill + more (remix)
by WolfesBlueBox is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
朋友，你觉得上面这个模型，属于下面的哪个分类？
必须全中文，且长度不超过15
相关内容
联系我们
邮箱: 289047960@qq.com
热门推荐
-
改进版参数驱动型坚固盒子2023-03-26 -
大猫雕像2023-05-14 -
GMX曲线支架支持GoPro安装（或轻型结构）2023-05-22 -
坚固盒子 / 排序盒2024-01-03 -
3D模型: Lula2024-04-07
最热下载
-
人耳道2023-03-26 -
通用型1/10比例底盘 - DKS基础款2023-03-26 -
可定制像素珠子照片面板2023-03-26 -
GLOCK 17型手枪2024-05-03 -
HomePod mini 壁挂式插座支架（欧规版）｜稳固不占地·支持线材整理2024-05-04
最新模型
-
FPV遥控纸飞机（机身）STL 3D模型2025-09-16 -
Flick 19E（增强型） - 可使用的玩具枪 - 类似弹弓的橡皮筋枪2025-08-21 -
3d打印的男人凉鞋2025-07-17 -
坏龙家的大宝贝女生别下2025-06-26 -
锅盖收纳锅盖放置挂钩-能防止12cm到32cm尺寸的锅盖2025-06-24