Logitech C920摄像头简单安装监控支架

Webcam Simple Monitor Mount - Logitech C920

2024-01-07 16:38:13

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Simple Monitor Mount for a Logitech C920 Webcam (may work with others),

I designed this as I wanted to be able to angle the webcam and not have it directly in front of me which the original mount doesn't allow, with this simple mount i can now have it off to the side of the monitor and angle the camera to face me, use a little piece of double sided tape to stick to top of monitor if you want it more secure.

v2 has a shorter rear support to fit other monitors.

For best strength print on its side.

I also used this tripod screw https://www.thingiverse.com/thing:1800702

For the mount I used the chep FF5.0 extra fast profile on my ender 3 and it printed in a little over 30 minutes,

For the tripod screw I printed at 100% infill and used the 0.12mm super quality profile and it took about 17minutes to print the screw as I wanted this as good a quality as possible, I had to cut the screw length down after printing as it was still a little too long.

Print Settings

Printer brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
0.28
Infill:
100%
Filament brand:
esun
Filament color:
black
Filament material:
PLA+
Notes:
I used the chep FF5.0 extra fast profile on my ender 3 and it printed in a little over 30 minutes,

For the tripod screw I printed at 100% infill and used the 0.12mm super quality profile and it took about 17minutes to print the screw as I wanted this as good a quality as possible.