皮卡汀尼式AK空气枪后方瞄准铁轨

Picatinny rear sight rail for AK Airsoft

2024-01-07 17:21:33

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a Picatinny rail that attaches to the rear sight, made for airsoft AK.
Existing products replacing AK rear sights require removal of the tangent sight itself.

I want to install a red dot sight when playing with others in airsoft and use an iron sight when playing alone at home, so I built a rail that I can mount over the tangent sight without removing it.

Installation was confirmed with E&L's (Arrow Dynamic) AK-74.
Compatibility with other companies' products has not been confirmed.

For installation, use a pin vise to drill 2mm-diameter holes on each side of the rear part, referring to the image.
Insert screws through the holes to fix the rear part in place.
The holes should be drilled where the screws pass under the tangent sight.

The front side is fixed in a shape that hooks into a recess in the front of the sight.

I wanted to keep the rails as low as possible, so the middle section has very thin members.
Do not break the support material when removing or installing it.

The thin section in the middle is tightened by fastening the red dot sight to the rail from above it, which is then pressed against the rear sight body to secure it in place and ensure its strength.

*This text is an AI translation by DeepL.

Print Settings

Printer brand:
Kingroon
Printer:
Kingroon KP3S
Supports:
Yes
Infill:
100%
Notes:
The middle section is very thin, so be careful not to break it when removing the support material.