Steam Deck 2.5" SSD mount

2024-01-07 19:46:07

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Wanted a clip on 2.5" SSD mount for the Seam Deck. All the mounts I found were screw on which meant the Deck would not fit into its case anymore. Also the other mounts I looked at are for specific USB-C to SATA adaptors.

So I found Vinny29s clip on stand and remixed it as a 2.5" SSD mount that can be easily removed.

The extra parts are for cable management (the USB-C to SATA adaptor we used has a long cable) and holding the USB-C to SATA adaptor in place.They were made separate as they may not be needed and ease of printing or editing for different adaptors.

The small clip has 2 holes to fit 1.75mm filament pieces that can be melted to form a "rivet" to hold the clip on. But in the end its simpler just to glue it. The other cable clips attach with the SSD mounting screws (M3X8mm in my case).

We are also using a 180° U Shape USB-C Male to USB-C Female adaptor so the cable doesn't stick out the top of the Deck.

Print Settings

Printer brand:
ELEGOO
Printer:
ELEGOO MARS 3 Pro
Resolution:
0.15mm but should fine at 0.2mm
Infill:
Doesn't matter. As parts are thin and mostly walls.
Filament brand:
Generic
Filament color:
What ever you like
Filament material:
PLA
Notes:
Print the mount standing on end (how the model downloads) with a Brim and supports. If you are printing the extra parts, print them at the same time and orient them close to the mount so the brims join together to help with bed adhesion.