AOS 7 Evo 'Immortal' 19mm FPV摄像头支架

AOS 7 Evo 'Immortal' 19mm FPV camera mount

2024-01-07 22:11:49

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I've successfully broken the stock camera mount (and I didn't like the sandwiched carbon solution), so I came up with this. TPU all around, can absorb pretty hard crashes. My cam (Runcam Phoenix HD) is behind the protector with a really small visible part on the image, that might be different depending on your FPV cam.

Print from TPU with at least 1mm wall width. Should fit any 19mm cameras. Supports are not necessary, maybe only the top part, but most printer should handle that small bridge easily.

Fusion360 file included, feel free to modify it for your needs.

This project is free, and I intend to keep it this way, but I appreciate any contribution by any of the ways below.

Paypal: https://paypal.me/ibruno26

Buy Me a Coffee: https://www.buymeacoffee.com/ibruno26

Revolut: https://revolut.me/ibruno26