console1 服务器机柜安装支架，适用于ZAOR Miza X2

Console1 Rack Mount Brackets for ZAOR MIZA X2

2024-01-07 22:26:16

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I was looking for a solution to rackmount Softube's console 1 on my Zaor Miza X2 desk. More specifically to the centre rack however there are no brackets for this use case on the market.

I decided to design my own, and after a lot of trial and error a managed to design these 4 brackets that allowed me to rack mount the device as I wanted to.

In order to use these after you print them, you will need to remove the 4 outer screws from the grey metallic frame and loosen the 2 middle ones so that the brackets can fit in the space under the grey metallic frame and the black panel.

The bottom metallic part of the device is not required. I would also suggest that you replace the outer screws with longer ones and add washers at the back.

I hope this helps!

Print Settings

Printer brand:
JGAurora
Printer:
JGAurora A5 & A5S
Rafts:
No
Supports:
Yes
Resolution:
0.5
Infill:
100
Filament brand:
Tecbears (Amazon)
Filament color:
Black
Filament material:
PLA
Notes:
The suggestion is for 100 infill as you want the brackets to be able to support the weight of the Softube device without issues. However, nothing prevents you from using a lower infill percentage