MG995 底座

MG995 bottom

2024-01-07 22:40:36

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Here's something useful. Servo wires stick out the side and can be in the way. The back of most servo wires come out of the side which are obstructed in many applications.

This is the back of a MG995 servo with the wire coming out the back to resolve clearance issues.

There is a little insert to block the hole where the wire is inserted.

Printed on Creality ender 5plus.

0.2 layer height
PLA
Raft with supports for the screw hole platform which is slightly offset from the back of the part works.

This part was made in solidworks with a caliper to measure dimensions, it's not perfect but it works. I uploaded the solidworks part for you to edit if you have the software.

There is also a model of a MG995 servo in stl and solidworks file extensions for modeling purposes.
It is also not perfect but a good start.

Hope this helps with your robotics project and troubleshooting.