Cable Keystone Patch Box

2024-01-07 23:52:24

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Cable Keystone Patch Box

A cable patchbox that uses standard wall-jack keystones for desk mounting. The original intent of this design was to connect PCs and peripherals to the patch boxes using short cables, and then route the cables with fixed wiring underneath the desk. That way you can reduce cable mess on your desk, as well as easily change out the PCs at various stations. Other uses are possible.

This work is (c) Jonathan Railsback

License CC BY-NC-SA

Repository with CAD files available at: https://github.com/jonbitzen/cable-keystone-patch-box

Patch Box Components

This repository includes the original FreeCAD components for the cable patch box system:

cable-patchbox: the main part that accepts keystone jacks, and is mounted either to the underside or edge of your desk
cable-patchbox-under-desk-mount: small bracket adapters which can be mounted to the square alignment lugs on the cable-patchbox to mount the patchbox underneath your desk
patchbox-side-mount: bracket adapters that allow the patchbox to be attached to the edge of the desk, in a manner that allows access to the keystones from the desktop. note that the side mounts are left and right handed
side-mount-screw: a printable screw to be used with the patchbox side mounts

Scalable Features

There is a spreadsheet in the "cable-patchbox" model with a parameter that will allow you to change the number of keystones. Note that at this time it is "delicate", and changing it more than once may cause the model to break. In that case be sure not to save the model, re-open it in FreeCAD, and try a different parameter for the number of keystones.