SAURK - THOMY 管脚 - 简易可靠打印设计
THE SAURK - THOMY TUBE FORK - easy & working print
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
This is the SAURK Tube Fork designed for 3D printing - "The Swiss Army Knife of Forks"
It is for big sauce tubes with a thread diameter of about 15mm.
It's easy to print with a FDM or SLA printer.
There are 4 models from which you can choose.
- short & long tips version
- metric & non metric 3-way thread
Print Orientation:
To make sure the fork doesn't break, the print orientation is very important. Therefore, place the model in the slicer so that you print it vertical so that the tips of the fork lie on the printing surface. As a result, the tips don't just break off later.
FDM Print Settings:
- 0.4mm nozzle
- quality mode
- 3 perimeters
- 25% infill
- 0.1mm Layer high
It's recommended to print it with a food-safe ABS. Because you can then smooth the print with acetone vapor. You can also do it in the dishwasher.
I uses BASF Ultrafuse ABS Natural White and let it about 20-25min in the acetone vaping jar.
LEAVE A LIKE AND POST YOUR MAKE <3
PS: If you lose your Tube Cap, just print a new one:
https://www.printables.com/de/model/709431-tube-cap-for-big-thomy-and-other-tubes-with-15mm-d
Custom Section
Tags
License
THE SAURK - THOMY TUBE FORK - easy & working print
by INVESTEGATE is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
猜你喜欢
联系我们
热门推荐
-
智能饮用水罐发放装置2023-03-26 -
GOPO Mik-1 投掷器2023-03-26 -
飞行模拟器简易脚部2023-03-27 -
隐身高能量微波卫星概念2024-01-17 -
手机和平板支架套装2024-03-17
最热下载
-
可定制像素珠子照片面板2023-03-26 -
GTA 5 大地图模型2024-04-21 -
克利普施 Promedia 2.1音量Pod模拟机器架（铝制支架）安装基座2024-04-29 -
沙箱建筑模型2024-05-08
最新模型
-
FLsun SR HGX Bambu直接驱动挤出机2025-07-18 -
戴森V6真空吸尘器配件壁挂支架2025-07-17 -
性感美女3d人像（带基座）2025-07-17 -
苍井空老师全身像苍井空跪姿2025-06-27
