皇后形态花瓶式香皂喷泉

Pawn Vase Soap Dispenser

2024-01-08 03:44:19

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This can either be a Vase or Soap Dispenser, both files are included in download. Designed in Blender, edited in Ideamaker, Zbrush, and Cur3d. I hate the little soap dispensers you have to keep filling up and tip over unless you hold it and use the pump, and they don't make for very nice decor. I wanted it to look a little decorative and modern, but with a vintage feel from the shape. It is designed to fit a soap bottle pump, but you will have to measure yours to be sure of fitment. I took inspiration from a pawn used in playing chess. With the wider heavier base, this will not tip over easily and allow you to press firmly down without holding it. If you don't need a soap dispenser, it will still make a nice vase.

NOTE: for the soap dispenser you may have to scale up or down 1-3% depending on your soap bottle pump choice, and also your printer calibration settings could vary.