Raspberry Pi 5 快速插入式外壳

Raspberry pi 5 snap-in case

2024-01-08 06:21:35

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I couldn't find a good raspberry pi 5 case to print so here is one designed by me.

Features:

No supports necessary (There are curved overhangs around the HMDI / power ports but this printed fine on my ender 3)
No screws required
Lid snaps into place
Ribbon cables can be fed through grille on lid
Pi is attached to the case using pins and C clips which I've designed. The clips fit into the recesses on the underside of the case and the pins should click into place. Alternatively you can use M2.5 x 8 screws and M2.5 nuts. Please be careful when pushing the pins into the C clips not to slip and damage the pi.
Step file included so you can modify however you like

As there are some snap / clip in features on this print, the fit of the parts will depend on how well your printer is calibrated. I reccomend following the teachingtech video https://teachingtechyt.github.io/calibration.html. Everything fits together quite tightly on my ender 3.

Cheers,

Matt