特斯拉Model 3座椅挂钩

Tesla Model 3 Seat Hanging Hook

2024-01-08 10:27:41

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Placing bags on the Tesla Model 3 rear seat can have an unexpected surprise. If the bag weighs enough (maybe 5Kg or more), the car will trigger a rear seat belt warning. Rather than disable the warning (child seat enabled), I decided to provide a hanging hook for that bag.

This is my second hook design. This hook takes advantage of the vertical head rest pillars. These pillars are hidden in the seat design, but with little effort, access can be gained to the pillars. My second hook design secures to these pillars.

The hanging hook was printed in PLA+. PETG would likely be a good plastic, too. I fear a standard PLA may prove too brittle in the pillar clips area. If you try PLA, let me know your experience.

My print of the battery plate is made in eSUN PLA+ 1.75mm black filament, with 0.2mm layer height and 15% infill on a Bambu X1 Carbon printer. I used print support on the build plate (only). To improve the interlayer appearance, The vertical part is set to 0.08mm layer height.

I hope you can find this design useful, too.

Remember to leave me some feedback or even a tip to keep me enthused to make more of these drawings.