Graco Pack 'n Play更换台附件管道

Graco Pack 'n play changing table attachment tubes

2024-01-08 12:52:51

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Replacement attachment tubes for the changing table on a Graco Pack n play Close2baby (may fit others).

Somewhere between kids we lost the attachment tubes that connect the changing table to the Pack ‘n play, so I designed me some! If you’re in the same pickle, hope this helps!

The original part has a spring loaded button that clicks in place. I opted for a simpler approach with a printed peg. I had to print it oversized for a nice pressure fit; 110% did the trick for me. Make sure it's snug! You don't want it falling out and your baby putting it in their mouth. Which reminds me, use this design at your own risk! I am not responsible for any accidents or damages.

No supports are needed but I did use a brim. I printed it a little hotter than usual, and 4 perimeters with a .4 nozzle. It is plenty strong and I don't have concerns using it. But, again: I am not responsible for any accidents or damages. You take care of your kids, I take care of mine :)