酷乐力达精灵条管理系统v2

Creality Sprite ribbon management v2

2024-01-08 14:49:30

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

In the 2nd version:

Fixing the ribbon with clips.
The ribbon no longer extends beyond the printer's dimensions.
Universal brackets, suitable for Ender 3 | S1 | Aquila, other similar.
Added clip for fixing other X-cables on the ribbon.
Added reverse of the clip for attaching the tape to a 40mm profile.

Tips:

It is best to print with PETG. It is flexible, sinteres well, and allow screws self-tapping. ABS won't work.
The bracket on the head is installed in place of the standard one.
It is better first snap the middle bracket on the ribbon, and then screw it on. The simplest option is to make 2.7 mm holes (in the pulley cover X) and screw M3х6 into. If you don’t have a 2.7 drill, then drill 3 mm and secure it with nuts on the back side.
The first option of the bottom bracket is mounted on an M3x20 through screw and a T-nut. The second option is for Ender 3 S1, because it's profile closed on the side.

Tags

creality sprite sprite extruder

酷乐力达精灵条管理系统v2

朋友，你觉得上面这个模型，属于下面的哪个分类？

上面没有我要的选项

必须全中文，且长度不超过15

相关内容

猜你喜欢

联系我们

邮箱: 289047960@qq.com

热门推荐

最热下载

最新模型