Ubiquiti AP Lite圆形盒装安装
Unifi AP Lite round box mount
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
I needed to mount my Unifi AP Lite on the ceiling and the supplied mount completely covered the round electrical box housing the network drop. This design mounts to the box using the two standard screws and has an open section for the network cable to come out.
I made it a bit thicker than the original and added three "feet" to allow for ceiling/box mounting irregularities. You can skip the last 1/16"-3/32" if you don't need that. Also feel free to get/copy/modify the original Onshape design here
Print Settings
- Printer brand:
Bambulabs
- Printer:
Bambu X1C
- Rafts:No
- Supports:No
- Resolution:.2mm
- Infill:10%
- Filament brand:
MakerGeek
- Filament color:
Red
- Filament material:
PETG
- Notes:
There are a few overhangs in this model. On my X1C it prints fine with the standard settings (goes slow and cools overhangs). YMMV. You may have to tweak your settings or include supports.
Tags
License
Unifi AP Lite round box mount
by jeffmcaffer is licensed under the Creative Commons - Attribution license.
相关内容
联系我们
最新模型
-
兼容弩套件卡 十字弩2025-06-21 -
Oral-B双齿夹持器3D模型2024-05-06 -
单行式钻石钻袋持有器（10个插槽）2024-05-06 -
Scirocco MK2 离合器踏板回位指南2024-05-06 -
鸟 buddy 附件扩展模块2024-05-06
最热下载
-
Gyro Air旋转空气模型2023-03-26 -
3D打印斯特林发动机型号Alpha2023-03-26 -
Articulated Snake2024-03-30 -
空客操纵杆配备控制杆固定装置2024-03-30 -
Enders 3版控制面板2024-05-08