Razer Deathadder Pro v2 充电站（带光效）

Razer Deathadder Pro v2 Charging Dock (Illuminated)

2024-01-09 02:31:58

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I was getting tired of connecting the USB-cable to my Razer Deathadder V2 Pro, so I made this little charging dock.

Print Settings

Printer brand:
Anycubic
Printer:
i3 Mega
Rafts:
No
Supports:
Yes
Resolution:
0.1mm
Infill:
25% but dosn't rally matter
Filament brand:
3DE Premuim
Filament color:
Black and transparent
Filament material:
PLA

Post-Printing

I made a small PCB consisting of four green LEDs protected by a 220 ohm resistor.
Initially I wanted to make the light pulse like on the Razer mouse, and only light up, when the mouse was charging.
I realized though that my electronics skill wasn't to par, so I ended up just having it light always on. ¯_(ツ)_/¯

The connectors are from a standard EU 230V socket plug, which I grinded down to the right length and rounded.
I had also made a socket for a small round neodynium-magnet to secure the mouse while charging.

Oh and remember: the polarity must be correct, and the left connector is DC ground (right obviously positive 5VDC.