JK-和JBD-BMS接口板箱式

JK- and JBD-BMS Interface Board case

2024-01-09 08:36:06

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This case is for the JK- and JBD-BMS Interface "Peter" boards. These are used in DIY battery builds to interface the older JK BMS or JBD BMS with RS485 to a Raspberry Pi with a CAN hat. I started with the older non-DC-2-DC boards Master & Slave. The same top fits both.

I have also done a version for the DC-2-DC but I am working on the measurements from Uksa007 as I do not have that version yet and have not verified the fit. The larger case will fit the non DC-2-DC boards however.

See Andy's video on the Off Grid Garage:
Perfect charging solution with the JK- and JBD-BMS Interface Board. Making the best BMS even bester!

Please support Uksa007 through his Patreon channel for his incredible work:
/ uksa007codedevelopment

Uksa007 on Github:
https://github.com/Uksa007/esphome-jk...

List of tested and supported JK-BMS:
https://github.com/Uksa007/esphome-jk... (scroll down to the section 'Supported Devices')

Print Settings

Printer brand:
Creality
Printer:
Ender-5 Plus
Rafts:
No
Supports:
No
Resolution:
Standard
Infill:
40%
Filament brand:
Any
Filament color:
Any
Filament material:
PLA
Notes:
The lid should be printed at least 40% fill to give strength to the pins. The bottoms are fine at 15% - 20% mostly for support of the screw.