K1 Max Riser Vent（Remix）创新升级版
(Another) K1 Max Riser Vent (remix)
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
I found the Original Ayahuasco riser very nice, the corners where very well designed, was very easy to put together.
The vented sides where very pretty with the design, I just found the Vent blocker a bit clunky and messy so I set about remixing them to put a slider in to open and close.
There is a Left and right handed vents so you can keep the switch all accessible.
There should be No need for supports.
The only thing you need to be careful of is the orientation of the print.
- Print Parts L1 and R1 stood up.
- Print Parts L2 and R2 lying on their back.
This is a remix of 1 part from this K1 + K1 Max lid riser https://www.thingiverse.com/thing:6157655
Follow that link to print the required corners.
Print Settings
- Printer brand:
Creality
- Printer:
K1
- Rafts:No
- Supports:No
- Resolution:0.16 Or 0.20
License
(Another) K1 Max Riser Vent (remix)
by PipSpawn86 is licensed under the Creative Commons - Attribution license.
相关内容
联系我们
热门推荐
-
特斯拉 Mini 3 Pro 无线遥控自行车支架2023-03-26 -
Gopro 6 3D打印模型2023-08-23 -
Wifi Trax-WFD 30 外壳2024-01-16 -
兰博基尼全新品牌标识2024-04-01 -
Walksnail VRX型号天线支架2024-04-12
最热下载
-
通用型1/10比例底盘 - DKS基础款2023-03-26 -
QC USB充电器外壳（XFW-KC42-4）2024-01-17 -
NA Miata车灯遮光条折叠机构顶盖2024-04-15 -
用于RRD通用型70182电机的mayrc maytech桅杆夹2024-04-20 -
花环戒指2024-05-08
最新模型
-
电动锁钥匙2024-05-08 -
苹果专业版音响格栅2024-05-06 -
MK2 扬声器保护罩2024-05-06 -
雨水收集与排放装置2024-05-06 -
34mm 管道卡 / DOPE 卡持有器 PRS2024-05-06