Polestar车钥匙3D模型

Polestar Key Fob

2024-01-09 21:52:10

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a replacement cover for Polestar keys.
The original one was made by ForgotRafe: https://www.thingiverse.com/thing:4668280.

I'm very new to the 3d printer world, and I wanted a new design on this key fob.
Ive made the edges beveled, I've made the logo smaler and moved it to the corner on one side. Also I made the logo flush with the rest

Note : If printed in one color I'm afraid the logo will disappear.

The printer I'm using is a BambuLab A1 with AMS.
(It says P1S in the printer settings.. they haven't added the A1 yet.)
The coloring is made with the Bambulab Studio slicer.

I've tried to print with diffrent setting, the one that worked for me was resolution at 0.16mm. I haven't used supports on my prints. And it has worked fine.

Like ForgotRafe's model you need to print 2 covers for a complete key.