Glue Spreaders - Festool Domino ( 4, 5, 6, 8, & 10mm(

2024-01-09 22:36:48

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Glue Spreaders - Festool Domino ( 4, 5, 6, 8, & 10mm(

Summary

I am lucky to own a Festool Domino DF500 but when gluing up larger assembles spreading the glue in each of the pockets takes time. There are glue spreaders on the market but I wanted to 3d print my own.

I have only used the 6mm Glue Spreader so far, but it proved to be far quicker and easy to evenly spread the glue in the pocket/hole.

The glue heads are 0.3mm smaller all round than the pocket.

The best method I have found is to put some glue on the hole, push in the correct size glue spreader until it bottoms out. This has the effect of pushing the glue up the sides some of it gets trapped in the grooves and by pushing the spreader in and out of the hole a few times it spreads the glue evenly.

Each of the spreaders has it own handle which has the size i.e. 6mm/0.3mm which is the gap.

If you need a different size please let me know. I will need the width, slot length, slot depth and clearance you would like.

I printed in PETG but would work OK in most materials.

Don't forget to wash them afterwards.