SIG 550 / SG 55x / Fass 90 / Stgw 90 3D模型装填指南

SIG 550 / SG 55x / Fass 90 / Stgw 90 loading guide for GP90 / RUAG ordnance ammo

2024-01-10 00:06:09

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

SIG 550 / SG 55x / Fass 90 / Stgw 90 3D模型装填指南

Summary

This is a spoon guide for quick loading of SIG SG 55x magasines from plastic stripper clips of RUAG GP90 ordnance ammo.

I designed it because I keep loosing the originals, and I wanted some crazyass colour, so that it is immediately visible, and no other shooters "mistake" it for theirs.

Loosely inspired by this part: https://www.thingiverse.com/thing:6230906
but completely redesigned with radial fillets everywhere to relive strain concentration, and made thicker to be robust enough with PLA.

Also, the clip opening is flush with the magasine top, which fixes the common "last round jumping out" issue with the original SIG loading guides.

Fits into the Fass 90 pistol handle storage, just like the original.

ACHTUNG: only works with RUAG plastic stripper clips, and only with SIG SG 55x / FAss 90 / Stgw 90 magasines.

Print Settings

Rafts:
No
Supports:
Yes
Resolution:
0.6 nozzle / line, 0.25 layer
Infill:
50% gyroid
Filament brand:
any
Filament color:
something madass
Filament material:
PLA
Notes:
Make sure the sharp angle where the part hooks on the magazine is either supported (tree everywhere works fine) or printed vertically.

1.2 mm walls.

You might want to go for PETG instead of PLA if you plan on using the part outdoors a lot.