又一轮月光

Yet Another Moon Light

2024-01-10 05:15:20

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

It is a very slight remix of the hollow version of the original Moon Paperweight to remove the solid ring at the bottom. This allows an LED light strip to be taped to the inside of the rim of one side and light up the whole moon.

The LED strip I used was The Light Multipurpose LED Lighting Strips for Sewing. The base I eventually settled on is this wooden one.

Print Settings

Printer brand:
Flsun
Printer:
Flsun V400
Rafts:
No
Supports:
Yes
Resolution:
0.15mm (0.2mm first layer)
Infill:
20%
Filament brand:
Hatchbox
Filament color:
White
Filament material:
PLA
Notes:
Printed at 125% of the original size.

Post-Printing

Drilled a small hole through one of the craters where the two halves join. That allowed the light's cord to be passed through. The LED strip comes with double-stick tape pre-installed, which was used to adhere the strip to the widest part of one of the halves.

Tags

educational Nightlight night light

License

CC BY-NC-SA

Yet Another Moon Light
by Capricorn1 is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.

又一轮月光

朋友，你觉得上面这个模型，属于下面的哪个分类？

上面没有我要的选项

必须全中文，且长度不超过15

相关内容

猜你喜欢

联系我们

邮箱: 289047960@qq.com

热门推荐

最热下载

最新模型