The Cryptid: 泵动式机制改装Nerf Sledgefire

The Cryptid: A Pump Action Clip Fed Nerf Sledgefire Conversion

2023-03-26 17:36:05

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

This is a detailed assembly guide for a custom-built PVC air blaster, likely based on a 'Sledgefire' design.

Here's a breakdown of what the instructions cover:

1. Pre-Assembly Work:

The instructions assume you've already completed some initial work, referred to as 'Sledgefire Preparatory Work.' This likely involves cutting and shaping PVC pieces, potentially drilling holes, and preparing the existing sledgefire mechanism for modification.

2. Assembling Key Components:

Latch Replacement: A new latch is installed above the plunger tube.

Wishbone Attachment: A wishbone-shaped piece replaces the original barrel, curving away from the plunger and attaching to the priming bar.

Hinges and Connectors:
- Long Hinge nuts and screws are used to attach the pump body to the connector arm.
- Short Hinge nuts and screws connect the pump to the connector arm.
- Pump hinges are attached to the pump body.

Clipwell Installation: A Clipwell is secured to the front of the sledgefire using screws, providing a guide for attaching other parts.

Foam Padding and Cam Arm: A 3mm foam pad is glued to the plunger tube for cushioning, and a cam arm is slid into the Clipwell.

3. Pump and Grip Assembly:

A bungee cord connects the pump grip to the Clipwell, providing tension for priming.

Manacles (presumably metal clamps) are attached to a 20mm PVC pipe, which slides into the pump grip.

A roller is inserted between the PVC pipes and secured with a pin.

4. Final Touches:

The 50mm PVC pipe is screwed onto the assembly, completing the pump mechanism.

The bungee cord tension is adjusted for optimal priming action.

Overall Impression:

This guide provides a comprehensive walkthrough of assembling a complex air blaster with many custom parts. It assumes some prior knowledge of PVC construction and tool usage.

Let me know if you have any more questions about this assembly guide!

The Cryptid: 泵动式机制改装Nerf Sledgefire

朋友，你觉得上面这个模型，属于下面的哪个分类？