IBM S360主机框架与Raspberry Pi Zero的结合

IBM Mainframe S360 with Raspberry PiZero

2024-01-10 12:09:46

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is based on genetoye's IBM 360 thingi design. The body was hollowed out to make room for a Raspberry Pi Zero and an OLED display was put in the front display. Included in the URLs txt file are the URLs to provided the IBM MVT operating system, circa 1970s, and the hardware & software for the OLED display. Yes, the Raspberry Pi Zero will run the original IBM operating system.

The actual item I created was done at 80% of the original genetoye size and the mount provided for the Raspberry Pi Zero is a Q&D hack, which needs improvement. It breaks easily and needs the holes a bit larger.

This is a good project for someone who long ago encountered an IBM 360/370 computer and now wants a working facsimile to sit on their desk!

This is a work in progress. The front display needs to have a while facade added to cover the holes on the corners of the OLED as well as to cover the remaining face of the printed display.

Just in case someone is using an Ender 3 S1 Pro, the 80%-sized gcode files are included in the zip file.

Print Settings

Printer brand:
Creality
Printer:
Ender-3 S1 Pro
Infill:
15
Filament brand:
generic
Filament color:
black, grey and orange
Filament material:
PLA
Notes:
I found this looks better when printed at 80% size. The RWsenser software for the Raspberry Pi Zero has been tested previously, and released. The OLED software was downloaded from Indestructibles and slightly modified (by me). As time permits, this project will be improved.