电子报纸天气显示器 Waveshare 7.5英寸 ESP32

E-Paper Weather Display Waveshare 7.5" ESP32

2024-01-10 23:10:27

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

A housing for the Waveshare 7.5 inch display.
A battery, the ESP32 and the charging electronics can be accommodated in the housing.

You can find better documentation with links to the parts used here:
https://spacepc.de/wetter-display-mit-esp32-und-3d-druck-gehaeuse/

Necessary parts:
ESP32 Mikrochip Waveshare
Waveshare 7.5 E-Ink Display
Chargeelectronics (TP4056)
Battery (3.7V)
Jumpercabel (Not absolutely necessary, can simply be soldered instead)
Batterycabel (Not absolutely necessary, can simply be soldered instead)
Screws (2x10mm)

Necessary tools:
Soldering iron
3D printer to print the housing. You can of course also build your own housing from wood/cardboard etc.

Assembly:
The display is attached to the front using double-sided adhesive tape. The ESP32 and the battery can be inserted into the housing. Unfortunately, the charging electronics are also glued as they have no cut-outs for screws. I simply used hot glue.
Take care not to drill into the cables with the screws when screwing them together.

Print settings:
0.2mm(standard), gyroid infill, tree support.