圣诞节机械装饰品

Christmas Mechanical Ornament

2024-01-10 23:25:16

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Good morning folks! Hope we all had a good Christmas. I know this is a little late now Christmas is past us, but is toy is good for all holidays!!
What I came up with is a mechanical design for a toy/ornament that you can use and design your own themed "toys" to put on it for every holiday you can think about.
You can also ignore the way I used the belts (*rubber bands) and change the order or cross them over to create different spinning in both direction and speeds, as all the pullies are of different sizes.

I hope printing this ornament brings you joy, you can color the pieces (as my daughter did to one of the snowman), and have loads of fun playing with it.

Be gentle with the tabs when closing and opening the lid, they are thin and have a way of snapping...
I've attached two different lids in this design, in case you wanted the mechanism to be visible, or enclosed, you don't have to print them both.

You can check out the project files on onShape on this link:
https://cad.onshape.com/documents/3b93d08c5b8d4fb45ea5cf83/w/a0ec5bc3f6a6eee7abeaa98b/e/ab234d554b5312d0f1596f0a?renderMode=0&uiState=65906cb772334c18f21742c2

Most of these STLs do need supports, I will split the files into "Recommended supports" and "No need supports".
All of these were printed with PLA, 0.4 nozzle, 0.2 layer height:

No need supports: