Heden YMER 1+1 安装支架

Heden YMER 1+1 Mount

2024-01-11 01:07:33

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

We weren’t pleased with the original mounting system for the Heden YMER 1+1 receiver, which was a clip style. This is an attempt to make a more ridged solution while still using the original mounting hardware. The spacing between the flat mount 1/4 20 through holes are meant to work with standard 1/4 20 cheese plates. All buttons and labels are still accessible when the device is inserted.

*Note: tolerances are tricky with FDM printers. This design is purposefully a tight fit. If you find the device doesn’t fit, try scaling the model up by a small amount (0.2 or 0.5%) in your slicer.