蒙大拿喷漩涂防护头盔

Montana Spray Paint Cover Cap

2024-01-11 01:50:11

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

A simple protective cap for Montana Cans to prevent accidental activation of the nozzle (as such covers are no longer included in the scope of delivery).

Notes on printing:

PETG (or at least PLA+) is highly recommended as it is more flexible and less brittle than PLA.
Good layer bonding is essential, as high tensile and shear forces act on the cap during mounting and removal. Therefore, an extrusion multiplier / flow rate of 103-105% and a print speed of no more than 50mm/s is recommended. (You can also reduce part cooling or increase the print temperature.)
No additional steps are required to ensure build plate adhesion, however, for the obligatory fit test I recommend a brim.

Notes on model:

Diameter of the can lip: 61.0mm
Fit type: Will require quite a bit of force to mount and remove. Cap can freely rotate on the can.
Required print volume: 66mm (outer diameter) x 45mm (height)