空气鸣笛器（适用于PVC 1/2英寸管道）

air horn for pvc 1/2" pipe

2024-01-11 05:36:57

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Love this little air horn, here is a 1.1 version. changes include:

1) added a piece (shown in red) to attach to the blow hole as a fitting so its easier to blow or hook up to an air system to be attached with glue
2) made another horn piece (orange) similar to the original in that it wedges in place the same, only the outside is back to the original pipe size.
3) resized so the piping matches 1/2" pvc pipe

Steps 2 and 3 are sisters in crime as with this setup, you can cut a section of 1/2" pvc pipe and make the horn longer pushing the ends of these two pieces into the pvc pipe. This will give this horn a much deeper richer tone based on the length of pipe you add.

What I do with this is use a hose clamp to a rubber hose onto the mouthpiece and hook up a push valve in line, and then the other side of the valve to a pressured wheel barrow innertube. by pushing the valve the air is let into the pipe. making a huge sound.