乌兰齐·法尔卡姆F38基础板

Ulanzi Falcam F38 Base Plate

2024-01-11 14:54:41

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Base plate to suit the Ulanzi Falcam F38 quick release mounting system,

NOTE: This has no lock so only use for stationary mounting.

I designed this to use with this DSLR monitor mount here - https://www.thingiverse.com/thing:5395698

It is a loose fit but it does the job I need it to do, I may tinker with it some and get the tolerances a little tighter at a later date,

If using with the tripod screw listed below then I suggest you run a metal tripod screw through it first just to ensure the threads are clean or you may risk breaking the 3D printed one in the base plate.

Tripod screw I use here - https://www.thingiverse.com/thing:4003381

Ulanzi Falcam F38 compatible camera plate here - https://www.thingiverse.com/thing:6179145

Print at 0.12 layer height for best results and a clean thread.

Print Settings

Printer brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
0.12
Infill:
50-100%
Filament brand:
eSun
Filament color:
Gray
Filament material:
PLA+
Notes:
I printed at 100% infill but should be fine at 50%, I wouldn't print below this as it needs a little strength.

乌兰齐·法尔卡姆F38基础板

朋友，你觉得上面这个模型，属于下面的哪个分类？

上面没有我要的选项

必须全中文，且长度不超过15

相关内容

猜你喜欢

联系我们

邮箱: 289047960@qq.com

热门推荐

时尚之星：华萨大型模型
2024-01-12
Weiner狗卫生纸架
2024-04-06
HellDivers 2 刺路先锋头盔无罩
2024-04-11
VNM V1踏板橡胶堆叠垫片
2024-05-03
本田CR-V后部防刮板覆盖件 - 08F02SWW61005
2024-05-06

最热下载

最新模型