Formula/GT3 碳纤维方向盘
Formula/GT3 Carbon Fibre Steering Wheel
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
Here's my design for Carbon Fibre Formula or GT3 style steering wheel with sequential shift light.
I made this for my Mazda MX5 track car but the wheel uses a standard bolt pattern that will work for mostly any vehicle.
While the wheel base was made with CF, the grips and shift light are all 3d printed.
Also attached is the arduino code for the Nano for the sequential shift light.
Components required for the shift light are:
- An Arduino nano
- 70mm x 40mm Prototype PCB
- 1x 300-500ohm resistor
- 1x 47 kohm resistor
- 1x 10 kohm resistor
- 1x 5v reg #7805
- 1x heatsink that fits voltage reg
- PNP transistor #2N3906
- 1000uF (6v or higher) capacitor
Link to circuit to build for shift light:
https://crcit.net/c/38f61c6bf2ca448b873acab04ba2b8e6
License
Formula/GT3 Carbon Fibre Steering Wheel
by bbeavis is licensed under the Creative Commons - Attribution - Non-Commercial license.
相关内容
联系我们
热门推荐
-
Raspberry Pi/Odroid C4风扇框架箱2023-03-26 -
星球大战克隆士兵飞行背包与背包（黑色系列1/12）2023-03-26 -
立方体螺旋容器2023-05-17 -
Gridfinity SFP 模块托盘 3D 模型2024-03-20 -
动漫角色3D模型：带面具的Animegao Kigurumi v3.52024-04-30
最热下载
-
怪兽大战：1998版2023-03-26 -
GPD Win3 把手型号2023-04-07 -
Glock 17/34 Solidworks 模型文件2023-04-21 -
安益卡通 i3 迷你 HGX 轻量挤出器2024-04-21
最新模型
-
龙珠孙悟空，无需支撑2025-07-19 -
HGX lite v2支架2025-07-18 -
弹弓HGX-FRAME V1A2025-07-18 -
艺术雕像（女性）2025-07-16 -
碧奇公主；桃子公主；水蜜桃公主2025-07-16