马莎·MX-5·米阿特·ND型号手机支架（杯架用）

Mazda MX-5 Miata ND Phone holder for cup holder

2024-01-12 01:35:43

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Phone holder for use with cup holder. It features an additional stabilzer which should avoid too much movement or vibration of the phone when driving fast turns.

It consists of several parts. I suggest glueing the arm, base and connector.

The back of the arm contains holes that can be used for zip ties to fasten the charging cable for the phone.

The ball head is available in two sized 17mm and 19mm which can be used to mount e.g. a universal holder or a charging plate (with ballhead mount).

The "RH" parts are for vehicles with the driver on the right side, "LH" on the left side (standard in europe). I could not test the "RH" parts but they are simply mirrored.

One image shows the suggested printing orientation for best stability. Another image shows it completely assembled.

For assembling you need additionally:
2x M3 nut
2x M3 screw (NOT countersunk), length 20mm

The arm should be printed with tree support.

I printed it using ASA filament

Enjoy it.