Dahua DHI-NVR6A08-64-4KS2 硬盘支架 3D模型

Dahua DHI-NVR6A08-64-4KS2 Hard Drive Rails

2024-01-12 05:09:32

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a drive rail assembly for a Dahua DHI-NVR6A08-64-4KS2 64 channel NVR. I designed this rail assembly because an NVR I support needed a storage upgrade, but irritatingly only came with 6 out of the 8 rails included. I couldn't find these rails anywhere, and Dahua wouldn't sell them without RMAing the whole unit, which wasn't going to happen.

You'll need 4 x #6-32 countersink screws to attach this rail assembly to the hard drive.

I recommend printing this design with a 0.1mm layer height with 100% infill.

Print Settings

Printer brand:
Creality
Printer:
Ender 3
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Resolution:
0.1mm
Infill:
100%
Filament brand:
Unknown
Filament color:
Orange
Filament material:
PLA
Notes:
Filament type isn't particularly important, as long as it's rigid enough to hold a hard drive. I would avoid using ABS because of warping issues.