紫外线固化盒（带蓝牙功能）

UV CURE BOX -Bluetooth

2024-01-12 06:05:41

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I recommend to print all in PLA. Infill not less than 50% as it has to hold parts together and you need to be able to place screws :D

Print Settings

Printer brand:
FlashForge
Printer:
Adventurer4
Rafts:
No
Supports:
No
Resolution:
0.3mm
Infill:
65
Filament brand:
Spectrum
Filament color:
Blue and Orange
Filament material:
PLA

Standards

NGSS CCSS

Materials Needed

Materials needed:

Steper motor - Nema17 - JK42HS34 - or any with max 34mm hight ESP32 devkit v4 Stepper Driver board Silent Stepstick - 2209 or 2208 Relay Module 1-chanel - 5V - 10A/250V 7x 3W LED 400-405nm OLED Screen Ic2 Encoder KY-040 Power Supply Boards: LM2596 DC-DC - ESP OLED and Relay Module Supply XL4015 DC-DC - UV LED SUPPLY and 12V 7A poker supply to power up all stuff