风暴种植突击兵加固版

Storm Planter Trooper Thicker

2024-01-12 11:04:52

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a remix of Taboy's Storm Planter Helmet

I dropped the original STL into Meshmixer and extruded the inner wall by one more line thickness (.042mm) making it just a little more sturdy. I printed it with the crappiest white PLA I had and it printed without internal supports and minimal boogers, looks pretty decent. With a .2 layer and 50mm/s it takes under 12 hours to print from the original 8.5 hours. I'm still learning Meshmixer and for the life of me I could not figure out how to keep the file size down.

Print Settings

Printer brand:
Anet
Printer:
A8
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
.2
Infill:
20%
Filament brand:
Any
Filament color:
White
Filament material:
PLA+ or something sturdy / UV resistant / heat resistant
Notes:
In Cura it will throw an error saying there are extraneous layers but it did print successfully. Just check the preview and make sure "print thin walls" is checked.

I always print with 3 layers to avoid and infill showing through and that seems to work well.

You should be able to print using a .6mm nozzle with close to a .6 line width. The details may suffer but it should still be pretty strong.