IT糖果/实用架设
IT lollipop / utility stand
2024-01-12 14:11:07
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
A new stand made as first project with Fusion 360. It's just a stand for lollipops
that stands out like a ballons. Also can be used as office supply stand or any other
thing that will make you float.
Just print as single pices and put them together. For the front plate I woud recomend
to print it in two colors(black and then filament swap then red). I didnt had any other
filament in colors so I just painted it.
Support is needed on the "cup" and the two letters so just use organic support.
Print Settings
- Printer brand:
Anycubic
- Printer:
Kobra
- Rafts:No
- Supports:Yes
- Resolution:0,2
- Infill:15
- Filament brand:
it doesn't matter
- Filament color:
it doesn't matter
- Filament material:
it doesn't matter
朋友，你觉得上面这个模型，属于下面的哪个分类？
必须全中文，且长度不超过15
相关内容
猜你喜欢
联系我们
邮箱: 289047960@qq.com
热门推荐
-
双重技术差分3D模型2024-01-13 -
桌面上夹持斯坦利/耶蒂杯子夹具2024-03-25 -
动感星链静态展示优化版2024-04-19 -
虚假电子烟2024-04-21
最热下载
-
吸血鬼之夜2024-01-15 -
Makergear M3 M2喷嘴标签2024-03-27 -
地牢方块积木，定制升降装置 1x1型定制立管(兼容地下城积木)2025-07-16 -
安益卡通 i3 迷你 HGX 轻量挤出器2024-04-21 -
用于Raspberry Pi高质量摄像头的D型安装适配器2024-05-08
最新模型
-
Ender Board 螺丝模式2024-05-08 -
Pokemon Go 社区日第86次 # Bounsweet 鸣泉2024-05-08 -
1/56 比例（约28毫米）戈瑞什小人2024-05-08 -
小型储罐支架2024-05-06 -
欧乐B牙刷架，适合两支牙刷2024-05-06