Boeing Stearman 75玩具飞机3D模型
Boeing Stearman 75 Toy Plane
使用说明
- 所有模型资源均由用户上传分享,内容来源于网络公开资源
- 侵权投诉:通过抖音私信 @jobsfan 联系我们(需附版权证明),24小时内处理
- 模型将通过邮件发送(5分钟内自动发货),感谢理解带宽压力
关于费用
我们是爱好者共建社区,为维持服务器成本,每个模型收取微量费用(仅覆盖基础开支)。我们承诺最低成本运营,感谢您的支持!
扫码手机访问
抖音私信 @jobsfanSummary
This is a toy plane that is based on the famous Boeing Stearman Model 75 biplane.
https://en.wikipedia.org/wiki/Boeing-Stearman_Model_75
The toy plane has a wingspan of 240mm and a length of 196mm. It can be completely assembled without using glue. All necessary clips and bolts are printed. I even included a small screwdriver.
Use the following settings for the wings: 0,12 layer height, 4 walls, 4 bottoms, 8 tops, 16% gyroid infill
The rest can be printed with 0,2 layers, 4 walls, 4 bottoms, 5 tops, 6% gyroid infill.
I recommend a brim only for the bolts. See my 3mf for more details and how I positioned the parts on the build plates. The 3mf file can be used with OrcaSlicer or Bambu Studio. I added a picture so you can see the orientation of the parts on the print bed.
Print the following parts with support:
- Fuselage (only for the cockpit)
- Wings (only for th bottom of the threads)
- Engine (not for the thread)
- Bolts (only for the head)
- Struts (use small tree support)
- Supports (use small tree support)
- Cockpit (only for the bottom of the thread)
Do not use support on the threads.
All parts will fit into a 200x200x200 build space.
Users with a smaller printer need to split the wings into two parts (can be done with the slicer) and glue them together after printing. Alternatively the model can be scaled down a little bit. I did not try this myself but I know there is a print that has been scaled down to 82%.
For assembly follow these steps:
- put the front cover on the engine
- screw the engine to the fuselage
- insert the cockpit into the fuselage and secure it with a short bolt
- insert the lower wing into the fuselage and secure it with a short bolt
- insert the rear wing into the fuselage and secure it with a short bolt
- this is now a bit tricky: insert the middle supports into the fuselage and put the top wing on the supports
- now put one strut between the lower and top wing
- insert a long bolt through the lower wing into the strut and screw it to the top wing
- repeat for the other side
- clip the propeller and the wheels with the pins to the plane
- make funny engine noises and play with your new plane
Disclaimer: This work by blecheimer is licensed under CC BY-NC-ND 4.0. You are not allowed to copy this model to other 3D printing websites without my permission.
Tags
License
Boeing Stearman 75 Toy Plane
by blecheimer is licensed under the Creative Commons - Attribution - Non-Commercial - No Derivatives license.
相关内容
猜你喜欢
联系我们
最新模型
-
第一人称标记:戈宾诺的冒险2024-05-08
-
兽人轮毂:专为28毫米比例车辆设计2024-05-08
-
宝可梦球隐藏2024-05-08
-
Arma Grom舵机/ESC安装架2024-05-06
-
橡胶储物棚盖支撑臂模型2024-05-06
最热下载
-
ToyREP 3D 打印机2023-03-26
-
Toyota 22RE发动机扩展套件2023-03-26
-
QC USB充电器外壳(XFW-KC42-4)2024-01-17
-
街用迷你四驱车轮子2024-05-01
-
幻想磁力2024-05-03