忍者旋转刀开瓶器

Shuriken bottle opener fidget spinner

2024-01-12 15:53:32

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Make sure to increase infill and wall count so that the spinner will not break when you open beer bottles. The infill I used was 30% and the wall count was 5. However, I would recommend to have a higher infill if possible and if you have the resources. :>
The hex nuts that I used as weights are size M8. The bearing is just a standard bearing.

Print Settings

Printer brand:
Prusa
Printer:
I3 MK3S
Resolution:
0.2mm
Infill:
30% or more
Filament brand:
Any
Filament color:
Any
Filament material:
PLA
Notes:
Make sure to increase infill and wall count so that the spinner will not break when you open beer bottles. The infill I used was 30% and the wall count was 5. However, I would recommend to have a higher infill if possible and if you have the resources. :>