NVIDIA Tesla K80散热罩

NVIDIA Tesla K80 Shroud for 80mm Fans

2024-01-12 22:48:40

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Shroud for NVIDIA Tesla hardware accelerator. Designed for specifically the K80, but might work on other models as well. Designed to have a similar appearance to the original shroud, but allow the mounting of 80mm fans to increase cooling capabilities. The model is bisected into two parts to allow printing on an Ender-3 V2

Running Folding at Home protein folding simulations on the K80 using 2 SilverStone 80mm fans at max speed had an average temperature of 60-65C. For comparison, using a single Noctua NF-F12 Industrial fan at max speed mounted in the front of the GPU would eventually reach over 80C under the same workload (which I would stop the simulation to prevent damage). The 120mm configuration does blow the hot air out the back of the GPU, but the dual 80mm fans would blow the majority of the air into the case, increasing case temperatures