Mancraft 智能接收器光保护门控单元

Mancraft Receiver Light Protection for Gate Units

2024-01-12 23:35:31

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

A friend of mine is using a Mancraft M4 Skeleton receiver together with a Gate Titan as FCU. Since the Gate (Titan / Aster) utilizes optical sensors for different detections, it gets distracted by light that shines into the body accidently. So the trigger and the fire selector were not working properly (sometimes) due to the skeletonized receiver.

To counter that issue I designed a slightly oversized cover. The cover needs to be hammered in place - please use something like a Softening Hammer ("Schonhamer" in German) or similiar tool. The cover will not fall of / out during games because of that.

From our experience you only need to cover the left side (see pictures with green cover) but the design fits the right side, too (see pictures with grey cover).
It is meant to be 1.8 millimeters thick. This is the maximum. Any thicker and it would stand out or interfere with the gearbox. Maybe you want to resize it in your slicer to be only 1.6 millimeters thick to be absolutely sure.

SketchUp! file is included as usual in case you need / want / like to modify this.