Crochet阻隔板
Crochet Blocking Board
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
For Crochet blocking board for blocking out granny squares, Afghan squares and other small knits like hats, booties, etc.
You print out the board and pins independently, both in upright position.
The board size is 175mm x 175mm edge to edge, consisting of 64 holes for pins arranged in 8x8 equidistant, square layout. The rod part of the pins are 50mm in length.
I am reliably told it works perfectly for 5inch x 5inch granny squares
Print Settings
- Printer brand:
AnkerMake
- Printer:
AnkerMake M5
- Rafts:No
- Supports:No
- Infill:20%
- Filament brand:
your preferred brand
- Filament color:
doesn't matter
- Filament material:
PLA+
How I Designed This
The board size is 175x175mm with 64 equally spaced holes. The pin holes are 12mmx12mm at the surface tapering to 10mmx10mm at the bottom end.
The equal spacing was calculated by fusion360 using the rectangular pattern tool and works out at 21.9mm between the centre-point of each adjacent hole.
Tags
License
Crochet Blocking Board
by gevert is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
相关内容
联系我们
热门推荐
-
压缩袋真空适配器2023-03-27 -
Schildkröte Line Tank2023-08-08 -
PGO BR200 验车速度传感器盒2023-08-09 -
Wled控制器箱2023-08-25 -
JBL Partybox 310 3D脚垫橡胶脚侧用型号2023-09-09
最热下载
-
车身RC 1/10 全套2023-03-26 -
Makita 10.8V 钻具与电池组2023-04-07 -
手指机器人MX版2024-04-14 -
Halo Reach巴黎级大型战舰2024-05-05
最新模型
-
Myuto Flick 19X - 可工作的玩具枪（橡皮筋弹弓状枪）2025-08-17 -
罗技K400键盘壁挂式支架2025-07-27 -
HGX lite v2支架2025-07-18 -
鞋撑2025-07-17 -
3d打印的男人凉鞋2025-07-17