超级简单角落夹紧工具

Ultra Simple Corner Clamp

2024-01-13 01:36:41

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I needed some simple corner clamps for gluing up laser cut projects. Most of the corner clamps I found both on Thingiverse and commercially were much too large for my small laser cut projects. This clamp is designed to print fast and holds just strong enough to glue up my projects. With a .8mm nozzle these print in about 30 minutes on my Ender 3 but I could probably print way faster. With the .4mm nozzle it took about 2 hours. Although the parts are separate they are designed to be able to be printed together if desired and the inner and outer clamp pieces can be rotated to fit within the clamp ring. There are two notches in the corner pieces so the clamp can be rotated 90 degrees as printed.

Print Settings

Printer brand:
Creality
Printer:
Ender 3
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Resolution:
Any, designed for .4mm nozzle but also prints great for .8mm
Infill:
20% or more. May need 100 percent for the spring depending on your wall settings. The band of the spring needs to be solid.
Notes:
-Parts can be arranged to fit in the clamp ring for a single print.

-The clamp ring should be solid in the band section so it may need 100% infill or an increase in wall count depending on your printer settings and nozzle size. 25% infill with a .8mm nozzle on my Ender 3 worked great.