Raspberry Pi外壳/套装

Raspberry Pi case/sleeve

2024-01-13 03:04:21

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This case/sleeve is created for a specific usecase.
I always use the passive heatsinks (see reference image) on my pi's but they have limitations in mounting options.

As I wanted to mount the pi to my 3D printer (and some other pi's in other locations), I wanted some kind of sleeve to put them in, providing access to the camera connector, SD card, Power/activity led and 5V/Ground/TRX GPIO pins to connect a PWM fan.

This case (which is a bit thick), is the result of some testing and is sturdy, yet compact enough, providing good cooling capabilities and the needed access. You can mount a fan onto the sleeve that doesn't need to be removed to take the pi out.

The pi fits snug so it won't come out easily by itself.

To mount to a v-slot rail (of your printer for example), you can just use M3 t-nuts. If you don't have any metal ones, you can use the t-nut model from DaVinci2000 (https://www.thingiverse.com/thing:3050607) and use regular M3 nuts. This should be sufficient for the usecase.

This specific sleeve is a blank one. I prefer to print it's use (application logo/name) on them as might be seen in the picture.