风扇式靴子干燥器

Air-Only Boot Dryer

2024-01-13 05:26:09

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a housing for a 40mm x 40mm x 10mm fan that was built to use as a backcountry boot dryer. The fans used draw only about 1.5W (5V DC, ~0.3A combined) with a USB power connection. The intent is to be able to run off of battery banks when power is not available to help dry limited moisture in boots. There is no heater and the small fans have limited CFM airflow. The fan wires were spliced together into 1 connection to the USB plug.

The fans are mounted by the 4 locating pins on the printed parts, with the wire fed through a hole printed into the parts. The drawing for the particular fan used is attached with the part files. The fan was 6800 RPM, 7.5 CFM.