Deltaco游戏椅DC410轮子漏洞修复

Deltaco gaming chair dc410 Wheel hole fix

2024-01-13 06:08:38

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Recently got hold of a Deltaco gaming chair dc410 for dirt cheap because all except one of the wheel mounting holes were broken off, making the wheels just fall out.

So I designed and printed out these wheel new wheel mounts to glued into place instead.

I did NOT use any super two-part epoxy for gluing since I wanted to still be able to pull the out incase they break. Just something to keep the blocks in place.

If you want to use this fix yourself REMEMBER, make the print as strong as possible, layers, 100% infill, the whole shabang. Also you will probobly not be able to just print out and attach one since it will change the hight of the wheel a bit.

Now i've only just started using the chair as I type this so i've not really torture tested the mounts yet.
(Will update this part if it breaks.)

If you have any questions feel free to ask.

Feel free to modify the part as you see fit.

Print Settings

Printer brand:
Creality
Printer:
Ender 3
Rafts:
Yes
Supports:
Yes
Resolution:
0.16
Infill:
100%
Filament brand:
clas ohlson
Filament color:
grey
Filament material:
PLA
Notes:
Printed with 10 layer walls, roofs and floors and with tri-hexagonal infill, for as much strength as possible.
My earlier prints were to weak and snapped immediatly but so far this is holding well.
You can also probably use stronger filaments if you have them.