MicroSD卡适配器存储盒

MicroSD card adapter holder/stacker

2024-01-14 01:39:19

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I created this holder/stacker to hold all the microSD card adapters I've accumulated over the years. It can also be used to stack SD cards, but it's only the topmost card that's easily accessible.

This design accommodates 32 MicroSD card adapters on each side, providing a total capacity of 64. I've included the Blender file, so this would be easy to adjust.
The cards are angled downwards with a 22.5-degree angle.
The gap between the cards and the wall is 0.15 mm, which results in a snug fit with minimal play.

Print Settings

Printer brand:
Creality
Printer:
Ender-3 v2
Resolution:
0.2mm
Infill:
100
Filament brand:
Prima Select
Filament color:
Black
Filament material:
PLA
Notes:
100% infill is not necessary, but I found it worthwhile to use the extra material for a slightly heavier base.

Tags

Micro SD Card Holder sd card SD Card Holder

MicroSD卡适配器存储盒

朋友，你觉得上面这个模型，属于下面的哪个分类？

上面没有我要的选项

必须全中文，且长度不超过15

相关内容

猜你喜欢

联系我们

邮箱: 289047960@qq.com

热门推荐

最热下载

最新模型