无边框滑动式浴室淋浴头固定架
Shower Head Holder for Frameless Sliding Shower
2024-01-14 02:22:22
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
Designed for "D style frameless sliding shower header".
Features
- Clips snug yet loose enough to easily slide back and forth for repositioning
- Hooks on outside for towels or clothes
- Screw allows adjusting angle of shower head
- Takes 4hrs to print with standard print settings (only 2hrs if you have a 0.6mm nozzle with draft settings like me!)
Installation
- Print using supports
- Use an M3 bolt & nut to connect the pieces together at desired angle.
- Clip onto the shower header (rail) buy slightly bending the clip outwards and sliding over the top of the rail.
- Insert the shower head. Loosen and adjust angle of the holder if desired. Tip: If you tighten the screw just right, you can change the angle without a screwdriver.
- Enjoy!
Recommendations
- PETG since the hook has to bend outwards to clip onto the rail.
- PLA might break when you install it. You could try warming the PLA print on your heated bed or filament dryer to make it temporarily more flexible during installation.
License
CC BY-NC-ND
Shower Head Holder for Frameless Sliding Shower
by ZacharyMaker8 is licensed under the Creative Commons - Attribution - Non-Commercial - No Derivatives license.
朋友，你觉得上面这个模型，属于下面的哪个分类？
必须全中文，且长度不超过15
相关内容
联系我们
邮箱: 289047960@qq.com
最新模型
-
牛奶盒2024-05-08 -
戴森V6 V7吸尘器软垫条端盖2024-05-08 -
柔软安全的大型模型箭头部2024-05-08 -
浴室里的男人建模2024-05-08 -
太阳能板支架2024-05-06
最热下载
-
3D机器人手臂模型2023-03-26 -
Dado - 立方体模型2024-03-24 -
Wolf系列手机支架2024-03-26 -
21700毫安电池单元保持架2024-04-06
