TFV-18 滴落尖端

TFV-18 Drip Tip

2024-01-14 03:20:31

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a drip tip for the TFV-18 tank. It's designed to be used with the factory O-rings that are on the tank. I may upload a version that works as a press on for those without O-rings

Only use this for 24hrs before discarding the tip. Even if you use PETG you're still running the risk of bacteria build up. You can use PLA and PETG, both are chemically stable and don't leech chemicals, but please throw it way after 24hrs of use.

Settings -

100% Infill. You can do a lot less, but the difference is super small.
Walls - 3 - 4
Supports - No
Brim - Yes for easy printing. It can be done without it, but use the extra plastic and do a brim.

Let me know if you want a taller or shorter version, I can easily adjust the model and upload a different size on this page. This version is slightly taller than the factory tips(which I can't find...which is why I made this)

I also uploaded a little organizer that holds 4 of these drip tips and has the TFV-18 name on it. I may upload alternate versions with no lettering if people prefer that.

Print Settings

Printer brand:
Creality
Printer:
Ender-3 S1
Rafts:
Doesn't Matter
Supports:
No
Resolution:
.2
Infill:
100%
Filament brand:
Inland
Filament color:
Matte White
Filament material:
PLA
Notes:
Print at 100% infill, but you can do 50% or even 30% with no issue. The difference in plastic used is so small you might as well print it at 100%.

Pictures show the tip removed from the bed, brim removed, but not cleaned up. Please clean up the wisps or plastic pieces so you don't suck them in.