Blue Snowball 5/8" to 1/4"-20 UNC Adapter

2024-01-14 03:34:44

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Blue Snowball 5/8" to 1/4"-20 UNC Adapter

Summary

This is an adapter for Blue Snowball microphone that I remixed from this adapter.
https://www.thingiverse.com/thing:4803203

Most of my smaller tripods I have are 1/4"-20NC, so I changed the threads to match that on the inside. Also added some bevels for easier handling, and to get away from the sharp edges of the original.

Print Settings

Resolution:
1.5
Infill:
4-6 perms, 35-50% infill
Notes:
As the original maker, Forest239, said in his settings...
"As long as your printer is dialed in, this should be a 100% fit when printed at 0.15mm layer height and a 0.4mm nozzle."